ГЛАВНАЯ             ФОРУМ             КОНТАКТЫ             RSS             20-YEARS ARCHIVE ПРОФИЛЬ
 
Логин:  
Пароль:  
 Чужой ПК
    Регистрация
    Вспомнить пароль

Techware Engineering Suite v4.0: @Air, @Gas, XLInterp, WinSteam Software
 
Techware Engineering Suite v4.0: @Air, @Gas, XLInterp, WinSteam

Techware Engineering Suite v4.0: @Air, @Gas, XLInterp, WinSteam

@Air provides thermodynamic and transport properties for moist air.  It is based on the formulations developed by the National Bureau of Standards (NBS) for the American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE). Techware Engineering has made some improvements to the formulations and extended the database to cover higher temperatures and pressures. The @Air package includes DeskTop Air, the advanced air property calculator.


@Gas provides thermodynamic and transport properties for a mixture of gases including Nitrogen, Oxygen, Argon, Carbon Dioxide and Water Vapor. These five gases account for 99.997% of the volumetric composition of standard air and better than 99.9% of the combustion products of most fossil fuels. @Gas uses  formulations similar to those of @Air along with a database developed by Techware Engineering to provide accuracy in the range of pressure and temperature covered by this product. The @Gas package includes DeskTop Gas, the advanced gas property calculator.


XLInterp is a different type of product from the three described above. It includes a library of functions used to extract numerical information from data tables. These tables may represent properties for other fluids not covered by the products above, equipment performance curves or even financial data. The functions use a process known as interpolation (either linear or non-linear) to extract information from the tables and can work in two dimensions. The real power of XLInterp stems from its ability to interpolate both forwards and backwards. See the product introduction for more information. XLInterp only works with the Excel spreadsheet and has no calculator associated with it.


WinSteam is our most popular product and has become the industry standard for thermodynamic and transport properties of steam and water.  It uses the latest industrial formulations (IAPWS IF97) developed by the International Association for the Properties of Water and Steam (IAPWS) and adopted by the American Society of Mechanical Engineers (ASME). It also allows the use of the previous formulations (IFC 1967) to analyze products developed using those properties. The WinSteam package includes DeskTop Steam, the advanced steam property calculator.

    Читать статью дальше  (комментариев - 9)


Graphisoft Archicad v21 build 5010 RUS addons Software
 
Graphisoft Archicad v21 build 5010 RUS addons

Graphisoft Archicad v21 build 5010 RUS addons

Graphisoft Archicad v21 - новая версия популярнейшей системы автоматизированного проектирования в области архитектуры, много раз отмеченного различными профессиональными наградами в области САПР.


Инновационность с самого начала была отличительной чертой Archicad. В Archicad v21 компания Graphisoft представляет совершенно новый инструмент Лестница, поддерживающий запатентованную технологию Прогнозируемого Проектирования. Кроме того, множество важных усовершенствований в области визуализации, взаимодействия OPEN BIM и производительности делают Archicad v21 одной из самых сильных версий в истории Graphisoft.

Проектирование лестниц является одной из сложнейших архитектурных задач. Новый Инструмент Лестница, появившийся в Archicad v21, автоматически учитывает тысячи возможных решений и предлагает наиболее подходящие в конкретной ситуации варианты. Лестницы состоят из различных компонентов, таких как проступи, подступенки, косоуры, тетивы и монолитные или консольные конструкции. Параметры каждого из этих элементов можно настроить и сконфигурировать индвидуально.

Встроенный в Archicad v21 механизм визуализации CineRender, основанный на механизме MAXON Cinema 4D 18, дает возможность архитекторам создавать высококачественные фотореалистичные визуализации BIM-проектов.

В Archicad v21 реализована гибкая система классов элементов, поддерживающая любые классификационные стандарты и обеспечивающая возможность организации междисциплинарного обмена данными на невероятном уровне. Классификации конструктивных элементов или зон можно настраивать централизованно для всего проекта в Менеджере Классификаций.

Внешние конструктивные или инженерные IFC-модели, созданные смежными специалистами, можно импортировать в проекты Archicad v21 в виде защищенных от редактирования связей. IFC-связи можно многократно размещать в проектах. Фильтрация Моделей позволяет ограничить передачу данных по категориям, конструктивной функции, инженерным сетям или простой выборкой элементов.

Новая функция Обнаружения Коллизий между двумя группами элементов, определяемыми пользователем, призвана помочь архитекторам сохранить свою роль главных координаторов проектов. Критерии Обнаружения Коллизий могут включать Типы Элементов, Классы, значения Свойств и Реквизиты, такие как названия Слоев или Строительные Материалы. При помощи панели Разметки Archicad v21 обнаруженные коллизии можно выделить, пометить или отредактировать.

Одним из важнейших требований, предъявляемых к процессу организации проектирования, является возможность получения и редактирования различных видов данных. Archicad v21 позволяет легко получить доступ даже к информации, добавленной в проект без применения САПР или BIM-решений, например, к таблицам Excel. Функции «Импорта значений Массивов Свойств», реализованные в ARCHICAD, позволяют легко передавать и получать данные формата Excel в полуавтоматическом режиме. Это избавляет архитекторов от необходимости ручного ввода полученных данных, часто приводящего к возникновению ошибок.
    Читать статью дальше  (комментариев - 13)


ProtaStructure Suite Enterprise 2018 Software
 
ProtaStructure Suite Enterprise 2018

ProtaStructure Suite Enterprise 2018

ProtaStructure Suite is the most comprehensive solution for multi-material analysis, design and automated detail drawings of structures. ProtaStructure Suite combines the power of ProtaStructure together with the full detailing capability of ProtaDetails for the ultimate building design and detailing solution for structural engineering professionals. See below for information on which system is best for your business. ProtaStructure Professional Suite is the all-in-one package for multi-material modelling with steel, concrete and composite members, 3-D finite element analysis, code-compliant design and detailing of building structures. ProtaStructure Enterprise Suite extends professional edition with advanced time-history, staged construction and nonlinear analyses, seismic isolators, nonlinear link elements and  seismic assessment/retrofitting.


ProtaStructure 2018 includes new module - ProtaSteel - for steel connection design and detailing. Hundreds of new features and enhancements in ProtaStructure and ProtaDetails for rapidly designing and documenting your building projects, and our dynamic new ProtaBIM 2018 for coordination with other leading BIM systems.

More infoCompare editionsVideo lessons. Whats new in 2018 version.
    Читать статью дальше  (комментариев - 26)


RockWare AqQA v1.5.0 Software
 
RockWare AqQA v1.5.0

RockWare AqQA v1.5.0

ПО от компании RockWare включает в себя модули по точечному картографированию, построению изолиний, поверхностей (в т.ч. объемных), моделированию вертикальных разрезов скважин, построения стратиграфических шкал, графиков, диаграмм, статистическому и гидрохимическому анализу, преобразованию проекций, трехмерному представлению данных. RockWare AqQA - как раз программа для работ по гидрохимическому анализу.


AqQA is software for water analyses: unit conversion, ion balance, sample mixing, basic fluid properties calculations, water chemistry diagrams (Piper, Stiff), and more. Imagine you could keep the results of your chemical analyses in a spreadsheet developed especially for the purpose. A spreadsheet that knows how to convert units, check your analyses for internal consistency, graph your data in the ways you want it graphed, and so on.
    Читать статью дальше  (комментариев - 11)


Survey CAD System pfCAD Discav v13.0.72 Software
 
Survey CAD System pfCAD Discav v13.0.72

Survey CAD System pfCAD Discav v13.0.72

Discav è lo strumento indispensabile per la progettazione di cave e discariche e per i controlli periodici di movimentazione, la stesura di piani di coltivazione, per la gestione di contabilità e stati di avanzamento dei lavori.

  • Inputi da dati topografici e calcolo dei volumi per sezioni e per prismoidi secondo vari metodi
  • Rappresentazione a triangoli, a griglia, a curve di livello in 2D e 3D
  • Gestione avanzata del disegno e del calcolo delle sezioni
  • Gestione dei punti quotati e del Modello Digitale del Terreno in un unico archivio all'interno del quale si possono inserire più rilievi topografici
  • Computo del movimento terra per spianamenti, vasche artificiali, cave, laghetti, ecc.
  • Solutore per poligonali, celerimetrico, planoaltimetrico
    Читать статью дальше  (комментариев - 5)


Survey CAD System pfCAD agriCAD v3.0.33 Software
 
Survey CAD System pfCAD agriCAD v3.0.33

Survey CAD System pfCAD agriCAD v3.0.33

Agricad PC offre strumenti per lavori di mappatura e progettazione in Agricoltura. E' sviluppato in ambiente CAD e le funzioni principali sono:

  • Gestione della mappatura
  • Verifica e controllo dei confini
  • Visualizzazione e stampa delle lavorazioni eseguite con Supertrack
  • Progettazione Vigneti e Frutteti
  • Progettazione irrigazione a Pivot
  • Gestione delle lavorazioni di spandimento liquami
    Читать статью дальше  (комментариев - 8)


Survey CAD System pfCAD Catasto v21.0.150 Software
 
Survey CAD System pfCAD Catasto v21.0.150

Survey CAD System pfCAD Catasto v21.0.150

Functionality:

  • Input da tutti gli Strumenti Topografici, da file ASCII, da PREGEO, da file DXF
  • Solutore per poligonali, celerimetrico, planoaltimetrico
  • Artifici per calcolo di nuovi punti e Divisione di Aree
  • Gestione avanzata del DATABASE CENSUARIO
  • Calibrazione e compensazione di mappe lette da scanner o digitalizzate compresa l'unione di più mappe raster e sovrapposizione al rilievo topografico
  • Gestione avanzata e disegno della Maglia dei PF
  • Procedure automatizzate per Riconfinamenti con il sistema della rototraslazione baricentrica
  • Ampia libreria di Problemi Topografici: Fuori Centro, Snellius, Hansen, Intersezioni, triangoli
  • File DXF e collegamento bidirezionale ad AutoCAD
  • Disegno Piano Quotato con curve di livello, sezioni e profili
  • Rilievo e restituzione in automatico di facciate di fabbricato
  • Generazione dell'estratto di mappa Autoallestito in modalità PREGEO e modalità CAD
  • Compatibilità con PREGEO10
  • Collegamento con GOOGLE MAPS con possibilità di visualizzare il libretto di rilievi GPS sulla mappa
  • Aggiornamento continuo dell'importazione di file da strumenti GPS di diversi marchi e modelli
    Читать статью дальше  (комментариев - 10)


Bentley SewerCAD CONNECT Edition Update 1 v10.01.00.70 Software
 
Bentley SewerCAD CONNECT Edition Update 1 v10.01.00.70 build 30/10/2017

Bentley SewerCAD CONNECT Edition Update 1 v10.01.00.70

SewerCAD is an easy-to-use sanitary sewer modeling and design software product that thousands of municipalities, utilities, and engineering firms around the world trust to design, analyze, and plan wastewater collection systems. Engineers can model both pressurized force mains and gravity hydraulics with ease, using steady-state analysis with various standard peaking factors, and extended-period simulations. Engineers can analyze pressure or free surface flow conditions using a robust gradually varied, standard-step algorithm in SewerCAD for solving subcritical, critical, and supercritical conditions, and complex composite profiles. The steady-state simulation analyzes the system under extreme flow conditions. Automated design features are available with a steady-state analysis type to find cost-effective sewer designs. The extended period simulations (EPS) allow modelers to visualize how the system behaves over time. Results can be animated through time to locate hydraulic jumps and surcharging sections. The LoadBuilder module included in SewerCAD helps engineers allocate sewer loads based on a variety of GIS-based sources such as consumer water use billing data, area-wide flow measurement, or polygons with known population or land use. Sewer loading in SewerCAD also can be applied as user-defined hydrographs, pattern-based loads, and unit loads. Modelers can use totally customizable unit load libraries to estimate sanitary flows based on contributing population, service area, total dry weather discharge, or their own customized loading types. SewerCAD also includes numerous pre-defined extreme flow factor formulas and tables, including Babbit, Harmon, Ten State, and Federov’s – or lets users enter their own formulas and tables. SewerCAD determines infiltration in gravity pipes, based on pipe length, length diameter, surface area, count value, or user-defined data. SewerCAD can also use multiple flow patterns or flow hydrographs for EPS. The sanitary load control center and inflow control center make it easy to globally edit or edit a filtered set of elements. The constraint-based design features in SewerCAD allow modelers to automatically design gravity piping and structures. The design is flexible enough to allow users to specify the elements to be designed, from a single pipe size to the entire system, or anything in between, by simply entering their design restrictions: minimum and maximum velocities, covers and slopes; pipe and manhole matching offsets; and allow (or not) drop structures. SewerCAD will automatically determine cost-effective pipe sizes and invert elevations, avoiding unnecessary pipe trench excavation.


Bentley SewerCAD обеспечивает расчеты объёма сточных вод, интенсивности входного потока, и потока в трубопроводе. Bentley SewerCAD является готовым решением, что позволяет использовать его автономно, или в AutoCAD. Независимо от используемой платформы, программное обеспечение Bentley SewerCAD содержит единый набор файлов с данными модели для надлежащей функциональной совместимости с каждой из платформ. Автономный интерфейс предоставляет легкие в использовании инструменты компоновки модели, поддержку фона сложной структуры, утилиты преобразования из CAD, GIS и баз данных, а также неограниченное число уровней отмены и восстановления операций компоновки. Кроме этого, пользователи AutoCAD могут добавить функции интеграции AutoCAD для создания, компоновки и построения диаграмм моделей с прецизионной точностью в среде, которая уже стала для них привычной. Bentley SewerCAD используется для определения докритических, критических и закритических условий с помощью надежных стандартных медленно изменяющихся пошаговых алгоритмов. Специализированный инструментарий позволяет визуализировать, как система канализации ведет себя в течение продолжительного периода времени. Результаты анализа системы могут быть анимированы для определения критических перепадов давления и перегрузки участков сети. Модуль LoadBuilder помогает инженерам анализировать нагрузки на коллектор, основанные на множестве источников поступления сточных вод. Учитывается использование воды потребителями, результаты замеров, площадные и линейные потребители. Нагрузка на коллектор в Bentley SewerCAD может также быть представлена как гидрограф, построенный на основании общей, и отдельно взятой нагрузки. Особенности Bentley SewerCAD позволяют инженерам автоматически проектировать систему канализации в зависимости от ее геометрии и нагрузок. Учитываются существующие и вновь проектируемые участки. Проект достаточно гибок, чтобы позволить пользователям рассчитать элементы систем канализации. Существует возможность определить как отдельный участок трубопровода, так и всю систему в целом, просто задавая граничные условия: минимальные или максимальные скорости, уклоны и наполнение. Bentley SewerCAD автоматически определяет рациональные диаметры трубопроводов и уклоны, для минимизации земляных работ. При использовании Bentley SewerCAD инженеры могут визуализировать и сравнить неограниченное число различных вариантов работы системы канализации в пределах единственного файла.
    Читать статью дальше  (комментариев - 12)


Bentley StormCAD CONNECT Edition Update 1 v10.01.00.70 Software
 
Bentley StormCAD CONNECT Edition Update 1 v10.01.00.70 build 30/10/2017

Bentley StormCAD CONNECT Edition Update 1 v10.01.00.70

StormCAD is a comprehensive modeling software program for the design and analysis of storm sewer systems. StormCAD provides calculations for catchment runoff, inlet capacity, and gutters and pipe network flow. StormCAD determines intercepted flow at network inlets, and routes bypass flow to selected bypass targets. Inlets can be computed using the U.S. Federal Highway Administration (FHWA) HEC-22 methodology and users can choose from grate, curb, slot, ditch, and combination inlet types. Engineers can use a variety of methods to compute headloss, including HEC-22 Energy and AASHTO. StormCAD uses the Rational Method to calculate peak flows in the storm sewer design, or accepts direct input of known flows for inlet inflows. StormCAD allows users to specify Intensity-Duration-Frequency data using equations or tables. Modelers can then plot the IDF curves, and reuse their data for other projects in that region. Engineers can work with an unlimited number of sub-watershed areas and C coefficients for each inlet watershed. The constraint-based design features in StormCAD allow modelers to automatically design gravity piping and structures. The design is flexible enough to allow users to specify the elements to be designed, from a single pipe size to the entire system, by simply entering the appropriate design conditions: minimum/maximum velocities, covers, and slopes; pipe elevation offsets (including whether or not to allow drop structures), maximum spread and depth for inlets in sag; and minimum efficiency for inlets on grade.


Bentley StormCAD является программным обеспечением для комплексной разработки и анализа систем ливневой канализации. Интуитивный интерфейс программы делает как никогда легким процесс разработки и анализа систем ливневой канализации от уличного стока до водовыпускного отверстия. Bentley StormCAD обеспечивает расчеты объёма стока, интенсивности входного потока, ливневого стока и потока в трубопроводе. Bentley StormCAD является готовым решением, что позволяет использовать его автономно, или в AutoCAD. Независимо от используемой платформы, программное обеспечение Bentley StormCAD содержит единый набор файлов с данными модели для надлежащей функциональной совместимости с каждой из платформ. Автономный интерфейс предоставляет легкие в использовании инструменты компоновки модели, поддержку фона сложной структуры, утилиты преобразования из CAD, GIS и баз данных, а также неограниченное число уровней отмены и восстановления операций компоновки. Кроме этого, пользователи AutoCAD могут добавить функции интеграции AutoCAD для создания, компоновки и построения диаграмм моделей с прецизионной точностью в среде, которая уже стала для них привычной. Bentley StormCAD определяет перехват потока водоприемниками коллекторной системы и направляет поток по обводным каналам к выбранным конечным точкам. Водоприемники могут быть рассчитаны по методике Федерального управления шоссейных дорог США (FHWA) HEC-22, а в качестве водоприемников можно выбирать решетки, бордюры, люки, кюветы и их комбинации. Инженеры могут использовать разнообразные методы вычисления потери напора, включая методы HEC-22 Energy и AASHTO. Bentley StormCAD используется для определения докритических, критических и закритических условий с помощью надежных стандартных медленно изменяющихся пошаговых алгоритмов. Bentley StormCAD рассчитывает потери напора на трение потока с помощью формул Маннинга, Куттера, Дарси-Вейсбаха и Хазен-Вильямса, а также позволяет выбирать отрезки трубопровода круглой, квадратной, сводчатой или эллиптической формы и отрезки канализации неправильной, трапецеидальной или треугольной формы. Bentley StormCAD использует рациональный метод расчета расхода пика паводка при проектировании коллектора ливневой канализации. Вместо расхода, рассчитанного рациональным методом, Bentley StormCAD также допускает непосредственный ввод известных значений расхода для приточных водоприемников. Допускается вводить или импортировать данные о времени концентрации водосбора, или указывать минимальное допустимое время концентрации для предотвращения превышения объёма максимального стока для небольших водоприемников. Bentley StormCAD позволяет указывать данные интенсивности, продолжительности и частоты осадков (IDF) с помощью формул (включая Hydro-35) или таблиц. При выполнении моделирования можно затем строить кривые IDF и повторно использовать их данные для других проектов в этом регионе. Инженер может работать с неограниченным числом областей водосбора и использовать C-коэффициенты для каждого водоприемника водосбора. Bentley StormCAD позволяет вводить внешние сточные бассейны, дополнительные и переходящие потоки для моделирования внешних стоков, вносящих вклад в нагрузку любого водоприемника. Bentley StormCAD предоставляет несколько методов вычисления времени прохождения, включая полную скорость внутри трубы, нормальную скорость, среднюю конечную скорость и средневзвешенное значение скорости.
    Читать статью дальше  (комментариев - 7)


Bentley SewerGEMS CONNECT Edition Update 1 v10.01.00.70 Software
 
Bentley SewerGEMS CONNECT Edition Update 1 v10.01.00.70 build 30/10/2017

Bentley SewerGEMS CONNECT Edition Update 1 v10.01.00.70

If building and preparing your sewer models feels like a never-ending task, SewerGEMS software is for you. SewerGEMS streamlines the modeling process, so that you have more time for solving wastewater engineering problems, such as improving capacity and limiting sewer overflows, which ultimately enable utilities to comply with sewer regulations set by regulatory agencies. For more than three decades, SewerGEMS has provided utilities and wastewater professionals like you with advanced engineering tools to plan, design, maintain, and operate sanitary and combined sewer systems, including:

  • Engineering decision guidance tools: Leverage SewerGEMS’ what-if scenario management tools to gain a better understanding of the behavior of your wastewater system, improving decision making and response time.
  • Improved model accuracy: A well calibrated model decreases the risks of making poor decisions by ensuring that the model uses the best available data. SewerGEMS calibration tools such as SCADA integration enable you to rely on your model results.
  • Increased information mobility: SewerGEMS’ full GIS, CAD, and SCADA interoperability enables the cost-effective sharing and flow of information between utilities’ design, engineering, GIS, and operation departments, and their consultants. You can leverage the data that the utility invested in once and reuse across departments.
Приложение SewerGEMS является полностью динамическим, многоплатформенным решением для моделирования городских и комбинированных канализационных систем. Приложение позволяет инженерам анализировать городские и комбинированные системы отвода стоков благодаря использованию встроенных инструментов гидравлического и гидрологического анализа, а также разнообразным методам калибровки дождевых погодных условий. 

Пользователи SewerGEMS могут почувствовать мощь и гибкость этого пакета при работе с платформами САПР, ГИС, а также при работе в автономном режиме; и в то же время использовать совместный доступ к единому источнику данных проекта. При работе с пакетом SewerGEMS службы и консультанты пользуются встроенной поддержкой четырех платформ, способных взаимодействовать в рамках одного продукта:
  • Автономный интерфейс Windows — для облегчения работы, доступа и повышения производительности;
  • Интерфейс ArcGIS - для интеграции с данными в формате ГИС, составления тематических карт и публикации;
  • Интерфейс MicroStation - для увязки сред геопространственного планирования и инженерного проектирования;
  • Интерфейс AutoCAD - для встроенной совместимости с наиболее популярной в мире САПР.
    Читать статью дальше  (комментариев - 16)


ПОИСК ПО САЙТУ

Что ищем:
Расширенный поиск

КАЛЕНДАРЬ
 
«    Март 2024    »
ПнВтСрЧтПтСбВс
 123
45678910
11121314151617
18192021222324
25262728293031
 

ОБЛАКО ТЭГОВ
 
 

НАВИГАЦИЯ
 
 
НАШ ОПРОС
 
 

DONATE LAVteam
 
bitcoin

Donate.
 

ДРУЗЬЯ
 
BASARUNET.ORG SOFT
 

СКИН
 
 


LAVteam: 1999-2023