ГЛАВНАЯ             ФОРУМ             БАЗА ДОКУМЕНТОВ             КОНТАКТЫ             ABOUT             RSS ПРОФИЛЬ

    Вспомнить пароль

Watercom PIPE++ 2017.1 Software
Watercom PIPE++ 2017.1

Watercom PIPE++ 2017.1

PIPES++ is a program that does Single Balance or Extended Period Simulations of flow and water quality in a town water supply system.

Components that can be modelled include: Reservoirs; Pipes; Pumping Stations; Minor Head Losses; Check Valves; Reservoir Inlet Control Valves; Various specialised control valves; Pressure Reducing Valves; Pressure Sustaining Valves; Flow Control Valves; Sprinklers.

Pipe flows may be calculated using either the Colebrook White equation or the Hazen Williams equation. You draw the network on screen using lines to represent pipes and pre defined symbols to represent pumps, valves, reservoirs etc. If you already have the pipes drawn in a CAD system (eg Autocad) you can create a DXF file directly from that. Data is entered via dialog boxes, which are accessed by right clicking on the pipe or symbol, and selecting Edit Data from the pop up menu. Extended Period simulations (typically for 24 hours) can be carried out and during the simulation pumps can be started and stopped and valves opened and closed based on control rules which you specify (eg when a reservoir fills, stop a pump; when it falls 2 metres start the pump). Results can be displayed in several ways including:

  • Detailed results shown on a network diagram at any time during the simulation
  • Trace graphs showing how a value varies with time (eg flow in a pipe, HGL at a node, Water Level in a reservoir)
  • Minimum and maximum pressure occurring at each node at any time during the simulation

Water quality analyses can also be carried out to simulate how the concentration of Chlorine, Fluoride or some other chemical varies with time. Chemical injection points can be specified with the chemical concentration specified as data for the duration of the analysis. Trace graphs are available for these results also. The various graphs can be sent to a printer or plotter or file or copied via the Clipboard directly to a word processor (eg Word for Windows) for inclusion in a report.

   Читать статью дальше  (комментариев - 7)

Watercom DRAINS 2018.01 Software
Watercom DRAINS 2018.01 x32

Watercom DRAINS 2018.01

DRAINS is a multi-purpose Windows program for designing and analysing urban stormwater drainage systems and catchments. DRAINS can model drainage systems of all sizes, from small to very large (up to 10 km2 using multiple sub-catchments1 with ARR 2016 and ILSAX hydrology, and larger using storage routing model hydrology). Working through a number of time steps during the course of a storm event, it converts rainfall patterns to stormwater runoff hydrographs and routes these through networks of pipes, detention basins, channels and streams. In this process, it integrates:

  • design and analysis tasks,
  • hydrology (five alternative models) and hydraulics (two alternative procedures),
  • closed conduit and open channel systems,
  • headwalls, culverts and other structures,
  • stormwater detention systems, and
  • large-scale urban and rural catchments.

Within a single package, DRAINS can carry out hydrological modelling using ARR2016, ILSAX, rational method and storage routing models, together with unsteady hydraulic modelling of systems of pipes, open channels, and in the premium hydraulic model, surface overflow routes. It includes an automatic design procedure for piped drainage systems, connections to CAD and GIS programs, and an in-built Help system.

   Читать статью дальше  (комментариев - 11)

Katmar Project Risk Analysis v3.0 Software
Katmar Project Risk Analysis v3.0

Katmar Project Risk Analysis v3.0

The Project Risk Analysis program enables the capital risks on projects to be evaluated, and calculates the financial contingency required to cover those risks in a rational and defendable manner. Too often the project contingency is guesstimated as a "gut feel" amount, without much consideration for the real risks involved. The procedure followed in PRA encourages disciplined estimating, and calculates the required contingency using the proven statistical method known as Monte Carlo Simulation. Although PRA uses sophisticated statistical techniques, it has been written for project professionals who are more at home with estimating and costing than with statistics. All the statistical models and distributions required have been specifically set up for contingency analysis and no knowledge of statistics is required. A tutorial on using statistical distributions and the Monte Carlo Method in capital cost estimating is included in the built-in help file for those who like to know what is going on under the hood. The cost estimate can be imported from a spreadsheet with a simple Copy and Paste, or it can be manually entered and edited within the program itself. The results calculated by PRA can be displayed in easy-to-read graphical formats that quickly and effectively give the estimator an overall appreciation of the risks. These graphs are also ideal as support documentation for presentations to senior management in the justification of requests for contingency funds. The results are also available in detailed tabular format. The extreme speed of analysis allows you to carry out your risk analysis in real time. A full Monte Carlo analysis with 100,000 iterations will typically take less than 5 seconds. Apart from the graphical and tabular reports generated by the program, you can export the reports in a variety of formats to suit spreadsheets, text documents and graphical editors. The raw data can also be exported for further processing or report generation in other applications. Exported data can be saved as files, or via the clipboard for pasting directly into other applications.

   Читать статью дальше  (комментариев - 10)

ProtaStructure Suite Enterprise 2018 SP1 Software
ProtaStructure Suite Enterprise 2018 SP1

ProtaStructure Suite Enterprise 2018 SP1

ProtaStructure Suite is the most comprehensive solution for multi-material analysis, design and automated detail drawings of structures. ProtaStructure Suite combines the power of ProtaStructure together with the full detailing capability of ProtaDetails for the ultimate building design and detailing solution for structural engineering professionals. See below for information on which system is best for your business. ProtaStructure Professional Suite is the all-in-one package for multi-material modelling with steel, concrete and composite members, 3-D finite element analysis, code-compliant design and detailing of building structures. ProtaStructure Enterprise Suite extends professional edition with advanced time-history, staged construction and nonlinear analyses, seismic isolators, nonlinear link elements and  seismic assessment/retrofitting. ProtaStructure 2018 includes new module - ProtaSteel - for steel connection design and detailing. Hundreds of new features and enhancements in ProtaStructure and ProtaDetails for rapidly designing and documenting your building projects, and our dynamic new ProtaBIM 2018 for coordination with other leading BIM systems.

More infoCompare editionsVideo lessonsWhats new in 2018 version.
   Читать статью дальше  (комментариев - 22)

HACI eTank 2016 v1.2.60 Software
HAC Innovations eTank 2016 v1.2.60

HACI eTank 2016 v1.2.60

eTank is a joint venture between HACI and Aqua Consultants and allows the instantaneous design and costing of a Full Tank.
   Читать статью дальше  (комментариев - 14)

CSI PERFORM-3D v7.0.0 Software

CSI PERFORM-3D v7.0.0 


CSI PERFORM-3D was designed for nonlinear analysis and performance assessment for 3D structures.

Displacement Based Design
  • Traditionally, earthquake-resistant design has been strength-based, using linear elastic analysis.
  • Since inelastic behavior is usually allowed for strong earthquakes, this is not entirely rational.
  • Strength-based design considers inelastic behavior only implicitly.
  • Displacement-based (or deformation-based) design considers inelastic behavior explicitly, using nonlinear inelastic analysis.
  • Displacement-based design recognizes that in a strong earthquake, inelastic deformation (or ductility) can be more important than strength.
  • PERFORM-3D allows you to use displacement-based design.
Implementation of ASCE 41
  • Procedures for displacement-based design using inelastic analysis are specified in ASCE 41, ”Seismic Rehabilitation of Existing Buildings”.
  • ASCE 41 applies to the retrofit of existing buildings, but the procedures can be applied to the design of new buildings.
  • PERFORM-3D implements the procedures in ASCE 41.
  • However, PERFORM-3D is a general tool for implementing displacement-based design. It is not limited to ASCE 41.
Capacity Design
  • The response of a structure to earthquake ground motion, whether elastic or inelastic, is highly uncertain.
  • Capacity design is a rational way to improve the response of a structure in a strong earthquake, by deliberately controlling its behavior.
  • Capacity design controls the inelastic behavior of a structure, by allowing inelastic behavior only in locations chosen by the designer. In these locations the structural components are designed to be ductile. The rest of the structure remains essentially elastic, and can be less ductile.
  • Controlling the behavior in this way improves reliability, reduces the amount of damage, and can reduce construction costs.
  • PERFORM-3D allows you to apply capacity design principles.
  • PERFORM-3D has powerful capabilities for inelastic analysis, but it is not intended for general purpose nonlinear analysis.
  • If you have no idea how your structure will behave when it becomes inelastic in a strong earthquake, PERFORM-3D can probably help you to identify the weak points, and hence can guide you in improving the design.
  • However, PERFORM-3D is not intended for ”design by analysis”, where the engineer expects the analysis to determine exactly how a structure will behave.
  • PERFORM-3D is a powerful tool for implementing displacement-based design and capacity design. It will help you to produce better designs, but it will not do the engineering for you.
   Читать статью дальше  (комментариев - 19)

Command Digital Studios AutoHook 2018 v1.0.4.00 Software
Command Digital Studios AutoHook 2018 v1.0.4.00

Command Digital Studios AutoHook 2018 v1.0.4.00

AutoHook - это небольшое приложение, которое перехватывает нажатия клавиш и передает их AutoCAD. Если AutoHook обнаруживает соответствие нажатой клавиши назначенному макросу, то управление передается AutoCAD и выполняются действия описанные в макросе. Примеры макросов прилагаются.

   Читать статью дальше  (комментариев - 8)

HVAC Solution Professional v8.4.2 Software
HVAC Solution Professional v8.4.2

HVAC Solution Professional v8.4.2

HVAC Solution Professional allows you to drag-and-drop super-intelligent objects to design air systems including both air handlers and rooftops. It also provides you with tools to build hydronic, steam and control systems. The software includes all the necessary piping and ductwork components to model most systems with unparalleled flexibility. Top this off with the capability to select equipment from one of our many equipment manufacturers that meet your design capacities. Create equipment and control schedules, bill of materials, schematic in dxf format, an electrical coordination matrix and more.

   Читать статью дальше  (комментариев - 6)

Red Hen Media Geotagger v3.2 Software
Red Hen Media Geotagger v3.2

Red Hen Media Geotagger v3.2

Do you want to geotag your 360 photos and videos, but your camera lacks a GPS sensor? Media Geotagger is your solution. It syncs GPS track logs with photos and videos taken without a GPS-enabled camera. Geotag your videos and photos post-process with Media Geotagger. View exactly where your media was taken in Google Earth (through Red Hen Systems' IsWhere) or ArcMap (through Esri's ArcGIS component to view, edit, create, and analyze geospatial data). Whether you are taking video with an action-camera, snapping photos of wildlife in remote mountains with a high-end camera, recording damage after a natural disaster with a simple digital camera, or capturing a holiday adventure with friends with your phone, Media Geotagger shows you the exact location of the data you are collecting.

   Читать статью дальше  (комментариев - 7)

Sentinel Systems Platinum WinSen v3.42.0022 Software
Sentinel Systems WinSen Platinum v3.42.0022

Sentinel Systems Platinum WinSen v3.42.0022


  • Log into the property's access control system remotely using a VPN connection.
  • Monitor the property activity of serveral locations using a single workstation.
  • No cache of information held in memory, Platinum validates ALL activity through the database which raises the bar in reliability.
  • Owner auditing of all changes to the system configuration and tenant data.
  • Multiple communication ports are supported for additional access control systems.
  • Able to monitor and identiy multiple doors per unit.
  • Alarm and monitor building and hallway entrances.
  • Utilizes SQL Server as the database engine
  • The NEW platinum access control runs as a Windows service, meaning no personnel log in is required.
  • Offering both, current and deliquent tenant alerts.
  • Instantly open gates or building doors remotely.
  • Supports non-tenant access codes.Controls access to unattended sites, using static IP addresses.
More info.
   Читать статью дальше  (комментариев - 3)


Что ищем:
Расширенный поиск

Adobe, Agnitum, Applied Flow, Aquaveo, AspenTech, Autodesk, Bentley, Bricsys, Carlson, CSI, CSoft, Dassault, Data East, Delcam, ESRI, Gemcom, GeoStru, Global Mapper, Golden Software, Graitec, Graphisoft, IES, Intergraph, LAVteam, Microstran, MicroSurvey, nanoSoft, Nemetschek, Progesoft, PROKON, PTC, Schlumberger, Siemens, Symantec, Tekla, Transoft, Trimble, VariCAD, Wiley, ZwSoft

Показать все теги

«    Июнь 2018    »



If you enjoy our work,
please support us.


yandex money


LAVteam: 1999-2017