ГЛАВНАЯ             ФОРУМ             БАЗА ДОКУМЕНТОВ             КОНТАКТЫ             ABOUT             RSS ПРОФИЛЬ
 
Логин:  
Пароль:  

    Регистрация
    Вспомнить пароль

CSI products 2013 license generator up to 19/07/2015 Software
 
CSI products 2013 license generator up to 19/07/2015

CSI products 2013 license generator up to 19/07/2015

Ну, что тут сказать, берите и пользуйтесь.

   Читать статью дальше  (комментариев - 24)


CSI ETABS 2013 v13.2.2 build 1170 Software
 
CSI ETABS 2013 v13.2.2 build 1170 x86+x64

CSI ETABS 2013 v13.2.2 build 1170

For nearly 30 years, ETABS has been recognized as the industry standard for Building Analysis and Design Software. Today, continuing in the same tradition, ETABS has evolved into a completely integrated building analysis and design environment. The system built around a physical object based graphical user interface, powered by targeted new special purpose algorithms for analysis and design, with interfaces for drafting and manufacturing, is redefining standards of integration, productivity and technical innovation.

The integrated model can include moment resisting frames, braced frames, staggered truss systems, frames with reduced beam sections or side plates, rigid and flexible floors, sloped roofs, ramps and parking structures, mezzanine floors, multiple tower buildings and stepped diaphragm systems with complex concrete, composite or steel joist floor framing systems. Solutions to complex problems such as panel zone deformations, diaphragm shear stresses, and construction sequence loading are now at your fingertips.

ETABS is the solution, whether you are designing a simple 2D frame or performing a dynamic analysis of a complex high-rise that utilizes non-linear dampers for inter-story drift control.

   Читать статью дальше  (комментариев - 18)


CSI ETABS 2013 v13.2.1 build 1134 Software
 
CSI ETABS 2013 v13.2.1 build 1134 x86+x64

CSI ETABS 2013 v13.2.1 build 1134

For nearly 30 years, ETABS has been recognized as the industry standard for Building Analysis and Design Software. Today, continuing in the same tradition, ETABS has evolved into a completely integrated building analysis and design environment. The system built around a physical object based graphical user interface, powered by targeted new special purpose algorithms for analysis and design, with interfaces for drafting and manufacturing, is redefining standards of integration, productivity and technical innovation.

The integrated model can include moment resisting frames, braced frames, staggered truss systems, frames with reduced beam sections or side plates, rigid and flexible floors, sloped roofs, ramps and parking structures, mezzanine floors, multiple tower buildings and stepped diaphragm systems with complex concrete, composite or steel joist floor framing systems. Solutions to complex problems such as panel zone deformations, diaphragm shear stresses, and construction sequence loading are now at your fingertips.

ETABS is the solution, whether you are designing a simple 2D frame or performing a dynamic analysis of a complex high-rise that utilizes non-linear dampers for inter-story drift control.

   Читать статью дальше  (комментариев - 8)


CSI ETABS 2013 v13.2.0 Software
 
CSI ETABS 2013 v13.2.0 build 1130 x86+x64

CSI ETABS 2013 v13.2.0

For nearly 30 years, ETABS has been recognized as the industry standard for Building Analysis and Design Software. Today, continuing in the same tradition, ETABS has evolved into a completely integrated building analysis and design environment. The system built around a physical object based graphical user interface, powered by targeted new special purpose algorithms for analysis and design, with interfaces for drafting and manufacturing, is redefining standards of integration, productivity and technical innovation.

The integrated model can include moment resisting frames, braced frames, staggered truss systems, frames with reduced beam sections or side plates, rigid and flexible floors, sloped roofs, ramps and parking structures, mezzanine floors, multiple tower buildings and stepped diaphragm systems with complex concrete, composite or steel joist floor framing systems. Solutions to complex problems such as panel zone deformations, diaphragm shear stresses, and construction sequence loading are now at your fingertips.

ETABS is the solution, whether you are designing a simple 2D frame or performing a dynamic analysis of a complex high-rise that utilizes non-linear dampers for inter-story drift control.

   Читать статью дальше  (комментариев - 16)


CSI Bridge 2015 v17.1.1.1099 Software
 
CSI Bridge 2015 v17.1.1.1099

CSI Bridge 2015 v17.1.1.1099

Modeling, analysis and design of bridge structures have been integrated into CSI Bridge to create the ultimate in computerized engineering tools. The ease with which all of these tasks can be accomplished makes CSI Bridge the most versatile and productive software program available on the market today. 

Using CSI Bridge, engineers can easily define complex bridge geometries, boundary conditions and load cases. The bridge models are defined parametrically, using terms that are familiar to bridge engineers such as layout lines, spans, bearings, abutments, bents, hinges and post-tensioning. The software creates spine, shell or solid object models that update automatically as the bridge definition parameters are changed.

CSI Bridge design allows for quick and easy design and retrofitting of steel and concrete bridges. The parametric modeler allows the user to build simple or complex bridge models and to make changes efficiently while maintaining total control over the design process. Lanes and vehicles can be defined quickly and include width effects. Simple and practical Gantt charts are available to simulate modeling of construction sequences and scheduling.

CSI Bridge includes an easy to follow wizard that outlines the steps necessary to create a bridge model.

Completely integrated within the CSI Bridge design package is the power of the SAPFire analysis engine, including staged construction, creep and shrinkage analysis, cable tensioning to target forces, camber and shape finding, geometric nonlinearity (P-delta and large displacements), material nonlinearity (superstructure, bearings, substructure and soil supports), buckling and static and dynamic analysis. All of these apply to a single comprehensive model. In addition, AASHTO LRFD design is included with automated load combinations, superstructure design and the latest seismic design.

   Читать статью дальше  (комментариев - 11)


CSI SAP2000 v17.1.1.1099 Software
 
CSI SAP2000 v17.1.1.1099 

CSI SAP2000 v17.1.1.1099

CSI SAP2000 - cистема трехмерного статического и динамического анализа методом конечного элемента и проектирование сооружений. CSI SAP2000 следует в той же самой традиции, показывающей очень сложный, интуитивный и универсальный пользовательский интерфейс, приведенный в действие непревзойденным механизмом анализа и средствами проектирования для инженеров, работающих над транспортировкой, индустриальными, общественными работами, спортивными состязаниями, и другими средствами. От основанной графической среды моделирования трехмерного объекта, к большому разнообразию опций анализа и проектирования, полностью интегрированных через один пользовательский интерфейс, CSI SAP2000, оказался наиболее интегрированной, производительной и практической универсальной структурной программой на рынке сегодня.

   Читать статью дальше  (комментариев - 23)


CSI ETABS 2013 v13.1.5 Software
 
CSI ETABS 2013 v13.1.5 build 1102 x86+x64

CSI ETABS 2013 v13.1.5

For nearly 30 years, ETABS has been recognized as the industry standard for Building Analysis and Design Software. Today, continuing in the same tradition, ETABS has evolved into a completely integrated building analysis and design environment. The system built around a physical object based graphical user interface, powered by targeted new special purpose algorithms for analysis and design, with interfaces for drafting and manufacturing, is redefining standards of integration, productivity and technical innovation.

The integrated model can include moment resisting frames, braced frames, staggered truss systems, frames with reduced beam sections or side plates, rigid and flexible floors, sloped roofs, ramps and parking structures, mezzanine floors, multiple tower buildings and stepped diaphragm systems with complex concrete, composite or steel joist floor framing systems. Solutions to complex problems such as panel zone deformations, diaphragm shear stresses, and construction sequence loading are now at your fingertips.

ETABS is the solution, whether you are designing a simple 2D frame or performing a dynamic analysis of a complex high-rise that utilizes non-linear dampers for inter-story drift control.

   Читать статью дальше  (комментариев - 18)


CSI SAP2000 v17.0.0.1083 Software
 
CSI SAP2000 v17.0.0.1083 

CSI SAP2000 v17.0.0.1083

CSI SAP2000 - cистема трехмерного статического и динамического анализа методом конечного элемента и проектирование сооружений. CSI SAP2000 следует в той же самой традиции, показывающей очень сложный, интуитивный и универсальный пользовательский интерфейс, приведенный в действие непревзойденным механизмом анализа и средствами проектирования для инженеров, работающих над транспортировкой, индустриальными, общественными работами, спортивными состязаниями, и другими средствами. От основанной графической среды моделирования трехмерного объекта, к большому разнообразию опций анализа и проектирования, полностью интегрированных через один пользовательский интерфейс, CSI SAP2000, оказался наиболее интегрированной, производительной и практической универсальной структурной программой на рынке сегодня.

   Читать статью дальше  (комментариев - 22)


CSI Bridge 2014 v17.0.0.1083 Software
 
CSI Bridge 2014 v17.0.0.1083 

CSI Bridge 2014 v17.0.0.1083

Modeling, analysis and design of bridge structures have been integrated into CSI Bridge to create the ultimate in computerized engineering tools. The ease with which all of these tasks can be accomplished makes CSI Bridge the most versatile and productive software program available on the market today. 

Using CSI Bridge, engineers can easily define complex bridge geometries, boundary conditions and load cases. The bridge models are defined parametrically, using terms that are familiar to bridge engineers such as layout lines, spans, bearings, abutments, bents, hinges and post-tensioning. The software creates spine, shell or solid object models that update automatically as the bridge definition parameters are changed.

CSI Bridge design allows for quick and easy design and retrofitting of steel and concrete bridges. The parametric modeler allows the user to build simple or complex bridge models and to make changes efficiently while maintaining total control over the design process. Lanes and vehicles can be defined quickly and include width effects. Simple and practical Gantt charts are available to simulate modeling of construction sequences and scheduling.

CSI Bridge includes an easy to follow wizard that outlines the steps necessary to create a bridge model.

Completely integrated within the CSI Bridge design package is the power of the SAPFire analysis engine, including staged construction, creep and shrinkage analysis, cable tensioning to target forces, camber and shape finding, geometric nonlinearity (P-delta and large displacements), material nonlinearity (superstructure, bearings, substructure and soil supports), buckling and static and dynamic analysis. All of these apply to a single comprehensive model. In addition, AASHTO LRFD design is included with automated load combinations, superstructure design and the latest seismic design.

   Читать статью дальше  (комментариев - 8)


CSI SAP2000 v16.1.1 Software
 
CSI SAP2000 v16.1.1 

CSI SAP2000 v16.1.1

CSI SAP2000 - cистема трехмерного статического и динамического анализа методом конечного элемента и проектирование сооружений. CSI SAP2000 следует в той же самой традиции, показывающей очень сложный, интуитивный и универсальный пользовательский интерфейс, приведенный в действие непревзойденным механизмом анализа и средствами проектирования для инженеров, работающих над транспортировкой, индустриальными, общественными работами, спортивными состязаниями, и другими средствами. От основанной графической среды моделирования трехмерного объекта, к большому разнообразию опций анализа и проектирования, полностью интегрированных через один пользовательский интерфейс, CSI SAP2000, оказался наиболее интегрированной, производительной и практической универсальной структурной программой на рынке сегодня.

   Читать статью дальше  (комментариев - 12)


ПОИСК ПО САЙТУ

Что ищем:
Расширенный поиск

ОБЛАКО ТЭГОВ
 
Adobe, Agnitum, Applied Flow, Aquaveo, Ascon, AspenTech, Autodesk, Bentley, Bricsys, Carlson, CSI, CSoft, Dassault, Data East, Delcam, ESRI, Gemcom, GeoStru, Global Mapper, Golden Software, Graitec, Graphisoft, Intergraph, LAVteam, Microstran, MicroSurvey, nanoSoft, Nemetschek, Progesoft, PROKON, PTC, Schlumberger, Siemens, Symantec, Tekla, Transoft, Trimble, VariCAD, Wiley, ZwSoft

Показать все теги
 

КАЛЕНДАРЬ
 
«    Апрель 2017    »
ПнВтСрЧтПтСбВс
 12
3456789
10111213141516
17181920212223
24252627282930
 

НАШ ОПРОС
 
 

DONATE

If you enjoy our work,
please support us.

bitcoin
BitCoin

yandex money
Yandex.Money
410013493702319

 
 


LAVteam: 1999-2017