ГЛАВНАЯ             ФОРУМ             КОНТАКТЫ             RSS             20-YEARS ARCHIVE ПРОФИЛЬ
 
Логин:  
Пароль:  
 Чужой ПК
    Регистрация
    Вспомнить пароль

GeoStru GDW v2012.16.0.146 Software
 

GeoStru GDW v2012.16.0.146

GeoStru GDW v2012.16.0.146

GDW analyzes walls in gabions, simple concrete weirs and GABIONS weirs in static ad seismic conditions. GDW has advanced graphics features including the three-dimensional view through which you can examine in detail the inputs made​​. Safety checks are carried out for load combinations defined by the user in accordance with the directives imposed by new regulations.

    Читать статью дальше  (комментариев - 6)


GeoStru Hydrologic Risk v2012.16.0.348 Software
 

GeoStru Hydrologic Risk v2012.16.0.348

GeoStru Hydrologic Risk v2012.16.0.348

Hydrologic Risk allows the determination of the Hydrologic and Hydraulic risk in a basin or courses confluent to a main river trunk. The characteristics of the discrete elements (basin, course etc.) in terms of affluence and effluence quantitively and temporally can be determined and thereby the flood flow rate of segments under consideration is derived.

    Читать статью дальше  (комментариев - 4)


Zeataline Projects PipeData-PRO v8.5.1 Software
 

Zeataline Projects PipeData-PRO v8.5.1

Zeataline Projects PipeData-PRO v8.5.1

PipeData-PRO является простой в использовании компьютерной программой, предоставляющей доступ к обширной базе данных труб, трубопроводов, фланцев, клапанов и прочих проектных данных.

Более подробно тут.

    Читать статью дальше  (комментариев - 15)


Tahoe Design HYDROFLO v2.2.0.0 Software
 

Tahoe Design HYDROFLO v2.2.0.0

Tahoe Design HYDROFLO v2.2.0.0

HYDROFLO is a powerful software tool that assists piping system designers in the modeling and analysis of single source/single discharge, re-circulating and gravity flow piping systems. These systems are commonly found in industrial process, water supply, wastewater treatment, fire protection, chemical process, mine de-watering, irrigation and HVAC applications among others. The models created with HYDROFLO can consist of up to 10 parallels and hundreds of elements (pipes, valves, fittings, pumps and tanks). Virtually any type of system element can be described from the wide variety of available elements available on HYDROFLO's menus. Element head losses can be described using flow vs. head loss curves, fixed head loss curves and custom friction coefficients. 

HYDROFLO models systems conveying any type of incompressible fluid and solves for the full-pipe, steady-state pressures and flows. Hydraulic grade line plots are displayed in the workspace of solved systems so that suction and high-head conditions are easily observed. The Hazen-Williams equation is available for use with water systems and the Darcy-Weisbach equation is available for use with any type of incompressible fluid. Once a system's total dynamic head and flow are found, PumpBase can be used to find the best pump for your application.

Systems are built by dragging and dropping both individual or groups of elements onto the workspace. HYDROFLO's new clipboard is available for mass storage, moving and copying of elements. The clipboard can be saved separately from project data, so that a collection of pumps and/or other elements can be brought into any design.Fly-over element inspection (placing the mouse cursor over elements) lets you rapidly identify system components. Elements can be stretched and/or increased in image size for easier viewing. Eleven example problems with their data files are presented in the Help file that depict most of the possible situations that arise in system design.

Once a system is built, PDF reports of flows, pressures, line and pump graphics and other operational results can be previewed and printed. Individual or groups of elements can be edited using the new Group Editor. Elements can be "tagged" to assist with editing.

    Читать статью дальше  (комментариев - 14)


Intergraph PV Elite 2013 SP2 Software
 

Intergraph PV Elite 2013 SP2 x86

Intergraph PV Elite 2013 SP2

Intergraph PV Elite – наиболее полное решение для анализа и расчета проектируемых аппаратов, работающих под давлением, и теплообменников. PV Elite легко определяет предельное значение давления для сосудов и теплообменников, в том числе при сочетании нагрузок с заданием большого объема данных. Исходные данные в PV Elite собраны в логические группы, что упрощает их ввод. Для получения справки по любому значению достаточно один раз нажать кнопку. Графическое представление расчетной модели в PV Elite помогает определить ошибки в исходных данных и удостовериться в результатах. С PV Elite вы сможете легко и просто просматривать расчетную модель и управлять ей. PV Elite выполняет расчеты в соответствии со следующими стандартами: ASME Глава VIII Разделы 1 и 2, PD 5500 и EN 13445. Также для оценки текущего состояния и остаточного ресурса действующего оборудования используется методика API 579 (пригодность к эксплуатации). Для проверки точности расчетов в PV Elite перечисляются основные уравнения, такие как расчет толщины и максимально допустимое рабочее давление (МДРД); программа также группирует результаты по типу (например, для внутреннего или внешнего давления, для напряжения изгиба, штуцера или фланца). Программа суммирует общие результаты и определяет элемент или узел для контроля МДРП всего аппарата.

    Читать статью дальше  (комментариев - 48)


DynaRoad v5.3.3.16122 Software
 

DynaRoad v5.3.3.16122

DynaRoad v5.3.3.16122

Финская компания DynaRoad Oy является разработчиком программного обеспечения и сервисов для управления проектами в области гражданской инженерии и строительства инфраструктуры, например, магистралей, туннелей, железных дорог, городских зон и портов.

ПО DynaRoad предназначено для оптимизации перемещения земляных масс, планирования на основе LBS-сервисов и контроль за производством.

    Читать статью дальше  (комментариев - 0)


Tahoe Design PumpBase v2.0c Software
 

Tahoe Design PumpBase v2.0c

Tahoe Design PumpBase v2.0c

PumpBase finds the best pumps for your fluid conveyance application. You can refine your selection by specifying up to 40 selection criteria. PumpBase's database contains thousands of curves from dozens of participating pump manufacturers. Detailed reports are created that can be submitted to pump manufacturers and sales representative for further application verification and price quotes.

Features:

  • Complete pump curve database access and editing.
  • Communicates with HYDROFLO for system curve development.
  • Quick affinity law conversions for speed and trim.
  • Extensive and editable liquid property database.
  • Automatic viscosity corrections to pump curves.
  • Efficiency and NPSHR curves are plotted on pump graphics.
  • Both English and SI (metric) units.
  • User Project files save all selection information.
  • Technical Bulletins/Dimensional Schematics available.
  • Liquid temperature rise calculations.

Operation:
View all pumps by default. As you add restrictions, the database is filtered for those criteria. Optionally specify operating point data TDH (total dynamic head) and operating flow to select pumps whose operating envelopes include the operating point. Specify NPSHA (Net Positive Suction Head Available) to restrict selection to pumps whose NPSH required is adequate for operation. Specify (or select) liquid property data to obtain pumps that can provide the required flow and TDH. Enter just the pumped liquid properties and view pump curves with viscosity corrections applied. Manual correction factors can be specified and applied to stocks, slurries and other liquids. Specify additional selection criteria such as specific manufacturer, curve key, series/model, speed, 60/50 Hz, max sphere size, pump orientation (horizontal, vertical, in-line, side-suction, end-suction), application type (fire, well, process, sludge/slurry, dewatering, sewage, wastewater, HVAC), features (portable, submersible, split-case, solids handling, non AC powered, self-priming, high temperature, high corrosive, ANSI, ISO 2858).

    Читать статью дальше  (комментариев - 7)


GeoStru GeoUtility v2012.11.0.509 Software
 

GeoStru GeoUtility v2012.11.0.509

GeoStru GeoUtility v2012.11.0.509

GeoUtility - collection of support software for professionals involved in geological, geotechnical and structural sectors.

    Читать статью дальше  (комментариев - 7)


GeoStru MDC v2012.15.1.587 Software
 

GeoStru MDC v2012.15.1.587

GeoStru MDC v2012.15.1.587

MDC is a software product for the design and analysis of reinforced concrete retaining walls either resting on their own foundation or on piles, optionally supported by tiebacks. The geotechnical computation employs the standard geotechnical methods subject to user choice and carries out the verifications prescribed by standard selected, amongst which global stability even in seismic conditions. Structural evaluations performs reinforcements sizing and verification with Ultimate Limit State or Allowable Tensions.

Supported computation standards: Eurocod 7/8, NTC 2008, STAS, British Codes BS8004/BS8110.

    Читать статью дальше  (комментариев - 5)


SusProg3D v4.517F build 842.5 Software
 

SusProg3D v4.517F build 842.5

SusProg3D v4.517F build 842.5

SusProg3D is the premier kinematic suspension design and analysis tool. More info.

    Читать статью дальше  (комментариев - 0)


ПОИСК ПО САЙТУ

Что ищем:
Расширенный поиск

КАЛЕНДАРЬ
 
«    Март 2024    »
ПнВтСрЧтПтСбВс
 123
45678910
11121314151617
18192021222324
25262728293031
 

ОБЛАКО ТЭГОВ
 
 

НАВИГАЦИЯ
 
 
НАШ ОПРОС
 
 

DONATE LAVteam
 
bitcoin

Donate.
 

ДРУЗЬЯ
 
BASARUNET.ORG SOFT
 

СКИН
 
 


LAVteam: 1999-2023