ГЛАВНАЯ             ФОРУМ             КОНТАКТЫ             RSS             20-YEARS ARCHIVE ПРОФИЛЬ
 
Логин:  
Пароль:  
 Чужой ПК
    Регистрация
    Вспомнить пароль

CSI ETABS 2013 v13.1.2 build 1053 Software
 
CSI ETABS 2013 v13.1.2 build 1053 x86+x64

CSI ETABS 2013 v13.1.2 build 1053

For nearly 30 years, ETABS has been recognized as the industry standard for Building Analysis and Design Software. Today, continuing in the same tradition, ETABS has evolved into a completely integrated building analysis and design environment. The system built around a physical object based graphical user interface, powered by targeted new special purpose algorithms for analysis and design, with interfaces for drafting and manufacturing, is redefining standards of integration, productivity and technical innovation.

The integrated model can include moment resisting frames, braced frames, staggered truss systems, frames with reduced beam sections or side plates, rigid and flexible floors, sloped roofs, ramps and parking structures, mezzanine floors, multiple tower buildings and stepped diaphragm systems with complex concrete, composite or steel joist floor framing systems. Solutions to complex problems such as panel zone deformations, diaphragm shear stresses, and construction sequence loading are now at your fingertips.

ETABS is the solution, whether you are designing a simple 2D frame or performing a dynamic analysis of a complex high-rise that utilizes non-linear dampers for inter-story drift control.

    Читать статью дальше  (комментариев - 15)


GeoStru MP v8.15.1.440 Software
 
GeoStru MP (Pile, Micropile) v8.15.1.440

GeoStru MP v8.15.1.440

Pile and micropile software is intended for calculation of the bearing capacity of the foundation terrain of a pile or micropile bearing loads in whatever distribution (moment, normal force, shear). Structural calculation yielding dimensions of longitudinal steel struts, interval and size of rings is also performed. The worksheet, upon which is shown the plan of piles or micropiles inserted in the foundation terrain, may be dimensioned as required. Geometric characteristics of the paling and the elements connected thereto (loads, location of trial sounding/boring and seismic stress) together with the geotechnic parameters of the terrain may be entered and altered within the worksheet activating the available functions either in the drop down menus, relocatable toolbars or through hot keys.

More info.
    Читать статью дальше  (комментариев - 14)


Invensys SimSci-Esscor PRO/II v9.1 Software
 
testing flexlm license for 
Invensys SimSci-Esscor PRO/II v9.1

Invensys SimSci-Esscor PRO/II v9.1

This is a medicine only. The app is here.

NOTE: for use this testing license you have to:
- restore 2 original dlls (if you already used REMEDY decision);
- configure flex server according instruction (in lavteam.nfo as usual);
- test PRO/II for missing (not licensed) features for future including them in the license.
    Читать статью дальше  (комментариев - 5)


Optimal Programs Cutting Optimization Pro v5.9.7.7 Software
 
Optimal Programs Cutting Optimization Pro v5.9.7.7

Optimal Programs Cutting Optimization Pro v5.9.7.7

Cutting Optimization Pro is a computer program used for obtaining cutting and nesting layouts for one (1D) and two (2D) dimensional pieces. Cutting Optimization Pro can be used for cutting rectangular sheets made of glass, wood, metal, plastic, paper, or any other material used by industrial applications. Cutting Optimization Pro can also be used for cutting linear pieces such as bars, pipes, tubes, steel bars, metal profiles, extrusions, tubes, linear wood boards and other linear materials.

 

More info.

    Читать статью дальше  (комментариев - 9)


Intech MicroScan v5.1 Software
 
Intech MicroScan v5.1

Intech MicroScan v5.1

 

MicroScan is a complete Supervisory Control and Data Acquisition software product, meeting the demands of both the industrial and research environments.

More info.
    Читать статью дальше  (комментариев - 1)


GeoStru Liquiter v2014.12.1.278 Software
 
GeoStru Liquiter v2014.12.1.278 Italian

GeoStru Liquiter v2014.12.1.278

Liquiter valuta il potenziale di liquefazione durante i terremoti mediante i seguenti criteri di previsione e metodi: criteri empirici; metodi semplificati.

Sono previste le seguenti opere di consolidazione - dreni, pali di ghiaia, heavy tamping.

More info.
    Читать статью дальше  (комментариев - 3)


GeoStru LoadCap v2014.21.1.702 Software
 
GeoStru LoadCap v2014.21.1.702

GeoStru LoadCap v2014.21.1.702

LoadCap id design for the computation of limit load in loose soils or rock, according Terzaghi, Meyerhof, Hansen, Vesic, Brinch-Hansen, Richards etc. Al, the computation of bearing capacity factors (according to the instructions for the geotechnical design in seismic areas - Italian Association of Geotechnical Engineering).

Settlements: Elastic (Timoshenko and Goodier), Oedometric, Schmertmann, Burland & Burbidge, liquefaction usig the method of Seed and Idris (1971). The settlements can be calculated at any point either inside or outside the foundation. Limit load in seismic conditions: SHIKHIEV & JAKOVLEV, RICHARDS, NTC 2008 Circolare applicativa.

Diagrams: Limit load as a function of the foundation base, of the depth of the bearing surface, of the acting loads. Unlimited number of layers. Display of pressure bulbs and failure wedges.

Supported computation standards: Eurocode 7/8, British Codes BS8004, Norme tecniche costruzioni (NTC 2008), NTC - Circolare 2 Febbraio 2009, n. 617, C.S.L.LPP.

    Читать статью дальше  (комментариев - 15)


GeoStru Stratigrapher v2014.20.0.254 Software
 
GeoStru Stratigrapher v2014.20.0.254

GeoStru Stratigrapher v2014.20.0.254

Stratigrapher enables the construction of stratigraphic columns for geologic or geotechnical usage and further the documentation of well construction. User form design is enabled through the provision of a document template editor. The resultant documentation model(s) can be stored for reuse. Thereafter the selection of documentation format is by the selection of templates. On the document, adjacent columns, user selected by choice of template, present the lithologic, lithotypes and exploration characteristic recorded during trial borings or well construction characteristics. Bitmap patterns are inserted directly from supplied libraries whose background and texture images may be user updated and personalized. The program permits simple modification of the elevation level of lithologic properties and the insertion of the standard trial results obtained during borings (Packet, Vane, sampling and Phreatic water table etc.) The document so produced may be saved as well as printed directly and the saved copy may be used permits their export and insertion in the profiles of other GeoStru programs.

    Читать статью дальше  (комментариев - 16)


Invensys SimSci-Esscor PRO/II v9.1 Software
 
Invensys SimSci-Esscor PRO/II v9.1 

Invensys SimSci-Esscor PRO/II v9.1

PRO/II выполняет строгие расчеты материальных и тепловых балансов для широкого диапазона технологических процессов: от первичной сепарации нефти и газа до реакционно-ректификационных процессов.

Интерфейсы:
  • HTFS – автоматизирует поиск данных для потоков в базе данных PRO/II и создает на их основе input-файл для HTFS;
  • HTRI - создает возможность полной интеграции программы проектирования и расчета кожухотрубных теплообменников HTRI XIST;
  • Linnhoff-March – материальные и энергетический балансы из PRO/II могут быть переданы в модуль Column пакета программ SuperTarget для анализа энергетической эффективности процесса разделения.

Дополнительные специальные модули:

  • Batch – расчет реактора с мешалкой периодического действия и расчет процесса периодической ректификации можно запустить отдельно или как часть технологической схемы PRO/II;
  • Electrolytes – этот модуль осуществляет интеграцию с термодинамикой электролитов фирмы OLI Systems и позволяетгенерировать собственные термодинамические модели электролитов, создавать собственные банки данных и работать с ними.
  • Polymers – позволяет моделировать промышленные процессы с участием полимеров – от очистки мономеров и реакций полимеризации до разделения и обработки. Polymers дает возможность описать любой компонент полимера как набор фракций с некоторым средним молекулярным весом, что позволяет провести точное моделирование смешения и разделения полимеров.
  • Profimatics – модели реакторов фирмы KBC (REFSIM, HTRSIM, FCCSIM) включены в программу PRO/II как технологические аппараты. Следует отметить, что компоненты и данные термофизических свойств, включая сходимость рециклов, автоматически обновляются при расчете.
  • AMSIM – модуль для строгого моделирования процессов очистки кислых газов аминовыми растворами в PRO/II полностью интегрирован пакет AMSIM фирмы DB Robinson.

Области применения:

  • Нефтепереработка (атмосферная колонна первичной перегонки нефти; блок подогрева нефти; колонна разделения установки коксования; основная колонна каталитического крекинга; установка газоразделения; стабилизатор бензина; установка вторичной перегонки бензина; реакторные узлы; очистка кислых стоков; алкилирование в присутствии H2SO4 и HF; вакуумные колонны).
  • Газопереработка (аминовая очистка; установки каскадного охлаждения; компрессорные станции; деэтанизаторы и деметанизаторы; установка детандирования; обезвоживание газа; ингибирование гидратообразования; многоступенчатая сепарация; эксплуатация платформ; циклы охлаждения; оптимизация установки турбодетандирования).
  • Нефтехимия (разделение ароматических углеводородов; разделение фракции C3; производство циклогексана; этиленовая установка; получение МТБЭ; выделение нафталина; производство олефинов; хлорирование пропилена).
  • Химия (синтез аммиака; азеотропная и экстрактивная ректификация; кристаллизация, выпарка; процессы обезвоживания; процессы неорганической химии (включая электролиты); экстракция; установка ректификации фенола; процессы с твердой фазой).
    Читать статью дальше  (комментариев - 9)


LARSA 4D v7.07.16 Software
 
LARSA 4D v7.07.16

LARSA 4D v7.07.16

LARSA 4D is structural analysis and design program for bridges and structures.

More info.
    Читать статью дальше  (комментариев - 3)


ПОИСК ПО САЙТУ

Что ищем:
Расширенный поиск

КАЛЕНДАРЬ
 
«    Март 2024    »
ПнВтСрЧтПтСбВс
 123
45678910
11121314151617
18192021222324
25262728293031
 

ОБЛАКО ТЭГОВ
 
 

НАВИГАЦИЯ
 
 
НАШ ОПРОС
 
 

DONATE LAVteam
 
bitcoin

Donate.
 

ДРУЗЬЯ
 
BASARUNET.ORG SOFT
 

СКИН
 
 


LAVteam: 1999-2023