ГЛАВНАЯ             ФОРУМ             БАЗА ДОКУМЕНТОВ             КОНТАКТЫ             ABOUT             RSS ПРОФИЛЬ
 
Логин:  
Пароль:  

    Регистрация
    Вспомнить пароль

Composite Structures according to Eurocode 4: Worked Examples Bookware
 
Darko Dujmovic, Boris Androic, Ivan Lukacevic - Composite Structures according to Eurocode 4: Worked Examples

Wiley, 2014
pdf, 926 pages, english
ISBN: 978-3-433-03107-0

Composite Structures according to Eurocode 4: Worked Examples

The use of composite structures in construction is increasing. The optimized combination of the two materials concrete and steel produces particularly cost-efficient structures. This book presents a large number of numerical examples with detailed explanations of the provisions of Eurocode 4. It deals with the most common structural components in building construction: beams, columns and slabs. Furthermore, comprehensive chapters provide insight into the topics of creep and shrinkage, as well as fatigue. This book enables the reader to efficiently perform analyses of composite structures. It is a valuable reference book for professionals as well as an outstanding means for students to become familiar with the Eurocode 4.

   Читать статью дальше  (комментариев - 19)


Design of Joints in Steel and Composite Structures Bookware
 
Jean-Pierre Jaspart & Klaus Weynand - Design of Joints in Steel and Composite Structures
Eurocode 3: Design of Steel Structures. Part 1-8 Design of Joints.
Eurocode 4: Design of Composite Steel and Concrete Structures. Part 1-8 Design of Joints.

Wiley, 2016
pdf, 402 pages, english
ISBN: 978-3-433-02985-5

Design of Joints in Steel and Composite Structures

This book details the basic concepts and the design rules included in Eurocode 3:

  • Design of steel structures: Part 1-8.
  • Design of joints.
  • Joints in composite construction are also addressed through references to Eurocode 4.
  • Design of composite steel and concrete structures.
  • Part 1-1: General rules and rules for buildings.
Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered.

Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations).

The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints.
   Читать статью дальше  (комментариев - 20)


An Introduction to Excel for Civil Engineers Bookware
 
Gunthar Pangaribuan - An Introduction to Excel for Civil Engineers

CreateSpace Independent Publishing, 2016
pdf, 387 pages, english
ISBN-10: 1537137719
ISBN-13: 978-1537137711

An Introduction to Excel for Civil Engineers

It's a must have standard engineering book that should have read many years ago. It addresses many articles that may not be covered by any Excel for engineering texts, such as step by step guides to create an application program and how to convert the steps into VBA code, how to perform matrix operations, macro for creating an engineering chart, a brief and simple guide to become an instant Excel-VBA programmer, and more... Also to be presented the depiction in AutoCAD program. Yes! AutoCAD is chosen because one of its advantages that relies on high drawing accuracy. 


You will learn how to create a simple AutoCAD script file using Excel formulas and Excel-VBA. It is expected that you will be able to create simple Cartesian graph in AutoCAD, even you are an AutoCAD first time user! With the ease of working with Excel, coupled with benefit of the given examples in this book, it is expected to increase the interest of the reader to create new original application programs. Thus, each model or even a specific calculation will be an exciting challenge for a programming job is already enjoyable. Happy Excel programming!
   Читать статью дальше  (комментариев - 45)


ASPEN PLUS Chemical Engineering Applications Bookware
 
KAMAL I.M. AL-MALAH - ASPEN PLUS Chemical Engineering Applications

Wiley, 2017
pdf, 623 pages, english
ISBN 978-1-119-13123-6

ASPEN PLUS Chemical Engineering Applications

Kamal Al-Malah, is professor of chemical engineering at Higher Colleges of Technology, United Arab Emirates and former chairman of the chemical engineering department at the University of Hail in Saudi Arabia. He holds B.S., M.S., and Ph.D. degrees in chemical/biochemical engineering. Dr. Al-Malah graduated from Oregon State University in 1993 and his area of specialty deals with mathematical modeling, optimization, simulation, and computer-aided design.

Aspen Plusis a process flowsheet simulator. A flowsheet simulator is a computer software that is used to quantitatively model a chemical processing plant. In general, a chemical processing plant is comprised of the core reactor unit and different additional unit operations, in the form of pre- and post-treatment steps, as well. In this regard, Aspen Plus is a very powerful tool that can be used to tackle different chemical process and unit operation calculation-based tasks, in the form of modeling, simulation, optimization, data regression, design specifications, sensitivity analysis, solids handling, dynamics and control, energy saving, safety compliance, and finally process economic analysis.

The book comprises 18 chapters. Each chapter, except the last chapter, constitutes a running tutorial that mainly covers one or more of common unit operations or chemical processes found in chemical industries. Moreover, the book has end-of-chapter contextual problems. The last chapter contains comprehensive problems (or term projects) that require an extensive knowledge of Aspen Plus features and tools that are already explained in previous chapters.

Overall, the book reflects the full-fledge nature ofAspen Plus implementation to versatile chemical process industries.
   Читать статью дальше  (комментариев - 12)


GIS and Geocomputation for Water Resource Science and Engineering Bookware
 
Barnali Dixon & Venkatesh Uddameri - GIS and Geocomputation for Water Resource Science and Engineering

Wiley, 2016
pdf, 1095 pages, english
ISBN 978-1-118-35414-8 (cloth)
ISBN 978-1-118-35413-1 (pbk)

GIS and Geocomputation for Water Resource Science and Engineering

GIS and Geocomputation for Water Resource Science and Engineering not only provides a comprehensive introduction to the fundamentals of geographic information systems but also demonstrates how GIS and mathematical models can be integrated to develop spatial decision support systems to support water resources planning, management and engineering. The book uses a hands-on active learning approach to introduce fundamental concepts and numerous case-studies are provided to reinforce learning and demonstrate practical aspects. The benefits and challenges of using GIS in environmental and water resources fields are clearly tackled in this book, demonstrating how these technologies can be used to harness increasingly available digital data to develop spatially-oriented sustainable solutions. In addition to providing a strong grounding on fundamentals, the book also demonstrates how GIS can be combined with traditional physics-based and statistical models as well as information-theoretic tools like neural networks and fuzzy set theory.

   Читать статью дальше  (комментариев - 13)


Расчет стальных конструкций в SAP2000 и ETABS - Часть 1 Bookware
 
Вебинар "Расчет стальных конструкций в SAP2000 и ETABS" - Часть 1
На вебинаре рассмотрены следующие вопросы:
  • Создание модели стального каркаса в SAP2000
  • Создание комбинаций нагрузок с помощью DAGraph - (link)
  • Проверка и подбор сечений стальных элементов в соответствии с СП 16.13330.2011 "Стальные конструкции"
  • Использование конструктивной нелинейности в стержнях
  • Использование элементов с переменным сечением
   Читать статью дальше  (комментариев - 1)


Up and Running with AutoCAD 2017 2D and 3D Drawing and Modeling Bookware
 
Elliot Gindis - Up and Running with AutoCAD 2017 2D and 3D Drawing and Modeling


Academic Press, 2016
pdf, 730 pages, english
ISBN: 978-0-12-811058-4
Up and Running with AutoCAD 2017 2D and 3D Drawing and Modeling
Up and Running with AutoCAD 2017: 2D and 3D Drawing and Modeling presents Gindis’ combination of step-by-step instruction, examples, and insightful explanations. The emphasis from the beginning is on core concepts and practical application of AutoCAD in engineering, architecture, and design. Equally useful in instructor-led classroom training, self-study, or as a professional reference, the book is written with the user in mind by a long-time AutoCAD professional and instructor based on what works in the industry and the classroom.
  • Strips away complexities and reduces AutoCAD to easy-to-understand basic concepts.
  • Teaches only what is essential in operating AutoCAD, thereby immediately building student confidence.
  • Fully covers the essentials of both 2D and 3D in one affordable easy to read volume.
  • Presents basic commands in a documented, step-by-step guide on what to type in and how AutoCAD responds.
  • Includes several complementary video lectures by the author that accompany both 2D and 3D sections.
   Читать статью дальше  (комментариев - 18)


Schlumberger Petrel 2009 - seismic-to-simulation software Bookware
 
Schlumberger Petrel 2009 - seismic-to-simulation software - training course

Schlumberger Petrel 2009 - seismic-to-simulation software

Petrel is a software platform used in the exploration and production sector of the petroleum industry. It allows the user to interpret seismic data, perform well correlation, build reservoir models, visualize reservoir simulation results, calculate volumes, produce maps and design development strategies to maximize reservoir exploitation. Risk and uncertainty can be assessed throughout the life of the reservoir. Petrel is developed and built by Schlumberger.


The purpose of this course is to build 3D model containing faults, horizons and properties. This 3D model will be used for volume calculations, well design and plotting. You will learn the process of importing the data, building the faults and inserting the horizons in time. These horizons, as well as entire 3D grid, will be depth converted, before inserting geological zones and layering. Psychophysical properties will then be distributed in the 3D grid based on the well log information. By attending this course you will obtain a general introduction to the main functionalities in Petrel. After having completed the course you will have been introduced to enough options in the program to be able to know how to build such a model on your own.
   Читать статью дальше  (комментариев - 18)


TEKLA+SAP2000: стальной каркас за 15 минут Bookware
 
TEKLA+SAP2000: стальной каркас за 15 минут

В 15-тиминутном видео показан процесс создания детализированной модели стального каркаса в Tekla Structures, передачи ее в расчетный комплекс SAP2000, подбора сечений и загрузки результатов подбора обратно в Tekla. Программный комплекс SAP2000 сертифицирован на соответствие российским нормам проектирования, в том числе СП 16.13330.2011

   Читать статью дальше  (комментариев - 5)


Программный комплекс ETABS для расчета конструкций зданий - Часть 2 Bookware
 
Вебинар "Программный комплекс ETABS для расчета конструкций зданий" - Часть 2
Вебинар посвящен возможностям расчетного комплекса ETABS, сертифицированного на соответствие российским нормам проектирования. На вебинаре рассмотрен процесс создание модели, назначения статических нагрузок и динамических воздействий на конструкцию, настройка параметров расчета и вывод результатов расчета.
   Читать статью дальше  (комментариев - 2)


ПОИСК ПО САЙТУ

Что ищем:
Расширенный поиск

ОБЛАКО ТЭГОВ
 
Adobe, Agnitum, Applied Flow, Aquaveo, Ascon, AspenTech, Autodesk, Bentley, Bricsys, Carlson, CSI, CSoft, Dassault, Data East, Delcam, ESRI, Gemcom, GeoStru, Global Mapper, Golden Software, Graitec, Graphisoft, Intergraph, LAVteam, Microstran, MicroSurvey, nanoSoft, Nemetschek, Progesoft, PROKON, PTC, Schlumberger, Siemens, Symantec, Tekla, Transoft, Trimble, VariCAD, Wiley, ZwSoft

Показать все теги
 

КАЛЕНДАРЬ
 
«    Январь 2018    »
ПнВтСрЧтПтСбВс
1234567
891011121314
15161718192021
22232425262728
293031 
 

НАШ ОПРОС
 
 

DONATE

If you enjoy our work,
please support us.

bitcoin
BitCoin

yandex money
Yandex.Money
410013493702319

 
 


LAVteam: 1999-2017